Thermocouples

Thermocouples with screw-in housing

TE-SGH

Request a product

M-OK_SGH

At a glance

Product properties

  • Thermocouples in screw-in housing
  • Wide range of dimensions M4, M5, M8, others available on request
  • Aluminium or brass screw-in housing
  • Temperature range -40°C ... +400°C
  • Simple screw-in installation on housing and surfaces

Description

Thermocouples with in screw-in housing are often used in positions with limited space, on the front face of machine housing or to monitor surface temperatures. They are suitable for measurement on housing of electric motors, generators, transformers and all other positions accessible via a threaded drilled hole.

Assembly variants

Thermocouple in screw-in housing

Thermocouples in screw-in housing are suitable for screwing in to housing and surfaces. The screw-in housing is available with and without a protective pipe made from brass, stainless steel or aluminium.

Thermocouple with spring-mounted measuring tip

This thermocouple with screw-in housing has a brass sleeve with spring-mounted measuring tip. The dimensions of the brass tip are ø 6 x 10 mm; those of the stainless steel protective pipe ø 4 x 65 mm. The supply line with a corrugated pipe protective hose is connected firmly with the M8 aluminium fitting using a press squeeze sprung connection. The spring connection means that the sensor can be set variably between 55 and 65 mm and provides a constant contact pressure.

Screw-in thermocouple with angled protective pipe in spring-mounted version

This construction is connected with two clamp screw connections at two different mounting points, guaranteeing optimum system tightness.

Plug-in thermocouple

The plug-in thermocouple has an offset measuring tip with spring mounting for optimum coupling to the application. This guarantees a constant contact pressure and optimum heat transmission.

Download certificates

Certificates

Manuals

Declaration of conformity

Request a product